300-165 dumps

How To Pass Cisco CCNP Data Center 300-165 Certification Exam

Get the Cisco CCNP Data Center 300-165 Certification Exam. “Implementing Cisco Data Center Infrastructure (DCII)”: https://www.pass4itsure.com/300-165.html (Q&As: 294). Free Cisco CCNP Data Center 300-165 exam practice test. Improve your skills and exam experience!

the latest Cisco CCNP Data Center 300-165 pdf

[PDF] Free Cisco 300-165 pdf dumps download from Google Drive: https://drive.google.com/open?id=1fTlrX__SMPiZaNpTO4CsigJ-Mi0op1PU

Related Cisco CCNP Data Center Exam pdf

Valid information provided by Cisco officials

300-165 DCII – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/dcii.html

The latest Cisco CCNP Data Center 300-165 exam practice questions test your strength

QUESTION 1
Assuming hello PDU authentication has been disabled, which command re-enables the feature on a FabricPath
interface?
A. switch (config-if) # fabricpath isis authentication-type cleartext
B. switch (config-if) # fabricpath isis authentication-type md5
C. switch (config-if) # fabricpath isis authentication check
D. switch (config-if) # fabricpath isis hello-interval
Correct Answer: C

QUESTION 2
Which statement about SNMP support on Cisco Nexus switches is true?
A. SNMP requires the LAN_ENTERPRISE_SERVICES_PKG license.
B. SNMP is not VRF-aware.
C. Only users belonging to the network operator RBAC role can assign SNMP groups.
D. Cisco NX-OS supports one instance of the SNMP per VDC.
E. Cisco NX-OS only supports SNMP over IPv4.
Correct Answer: D

QUESTION 3
When implementing Cisco Adapter FEX, which setting on the virtual interface card on the Cisco UCS C-Series Server
must be configured?
A. uplink failover
B. PXE boot
C. network interface virtualization
D. VM-FEX
Correct Answer: C

QUESTION 4
Scenario
The following four questions concern the Nexus 7010\\’s which are configured as a vPC pair at the core of a Data
Center network. You can utilize all the available show commands to answer the questions. Access to the running-
configuration is
not allowed.
Instructions
Enter NX-OS commands on 7K-3 and 7K-4 to verify network operation and answer four multiple-choice questions.
THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
Click on the switch to gain access to the console of the switch. No console or enable passwords are required.
To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next
button.

pass4itsure 300-165 exam question q4 pass4itsure 300-165 exam question q4-1

Within the vpc configuration of the 7K\\’s, the command peer-switch is configured.
What is the result of enabling this command?
A. Both vPC peers use the same STP root ID
B. The vPC primary switch (7K-4 in this case) also serves as the STP root to improve vPC convergence
C. The vPC secondary switch (7K-3 in this case) serves as the STP root to improve vPC performance
D. Allows 7K-3 to act as the active HSRP gateway for packets that are addressed to the MAC address of 7K-4
E. Automatically disables IP redirects on all interface VLANs mapped over a vPC VLAN to avoid generation of IP
redirect messages for packets switched through the vPC peer gateway router
F. Enables faster convergence of ARP tables after the vPC peer link flaps
Correct Answer: B

QUESTION 5
Refer to the exhibit. An engineer is implementing a new network design that includes a port channel to connect an MDS
core switch and an NPV switch. Which two Fibre Channel port types must be used to create Fibre Channel port
channel? (Choose two.)pass4itsure 300-165 exam question q5

A. N Port
B. NP Port
C. F Port
D. E Port
E. TL Port
Correct Answer: BC
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibook/pc.html

QUESTION 6
Drag and drop the VXLAN protocol characteristic from the left onto the benefit it provides on the right.
Select and Place:pass4itsure 300-165 exam question q6

Correct Answer:

pass4itsure 300-165 exam question q6-1

QUESTION 7
A Cisco Catalyst 6500 Series Switch suffers a supervisor failure. Which statement is true regarding Cisco NSF
functionality?
A. The line cards are reloaded.
B. The neighbouring routers do not participate in Cisco NSF.
C. The Cisco Express Forwarding cache is pruned.
D. Layer 3 reconvergence does not occur.
E. Cisco NSF can be deployed with RPR+.
Correct Answer: D

QUESTION 8
Refer to the exhibit. What is the maximum IPv6 unicast route memory allocated?pass4itsure 300-165 exam question q8

A. 4 MB
B. 8 MB
C. 1024 MB
D. 1 GB
E. 5 MB
Correct Answer: A

QUESTION 9
Which two items are required components of VN-Link in software? (Choose two.)
A. VDC
B. VEM
C. vPC
D. VSM
E. VRRP
Correct Answer: BD
The Cisco Nexus 1000V Series consists of two main types of components that can virtually emulate a 66-slot modular
Ethernet switch with redundant supervisor functions:
Virtual Ethernet module (VEM)-data plane: This lightweight software component runs inside the hypervisor. It enables
advanced networking and security features, performs switching between directly attached virtual machines, provides
uplink capabilities to the rest of the network, and effectively replaces the vSwitch. Each hypervisor is embedded with
one VEM.
Virtual supervisor module (VSM)-control plane: This standalone, external, physical or virtual appliance is responsible for
the configuration, management, monitoring, and diagnostics of the overall Cisco Nexus 1000V Series system (that is,
the combination of the VSM itself and all the VEMs it controls) as well as the integration with VMware vCenter. A single
VSM can manage up to 64 VEMs. VSMs can be deployed in an active-standby model, helping ensure high availability.
http://www.cisco.com/c/en/us/solutions/collateral/switches/nexus-1000v-switch-vmware-vsphere/white_paper_c11-525307.html

QUESTION 10
Which statement regarding the implementation of Fibre Channel domain IDs is true?
A. They are assigned on a per-switch basis.
B. They must be unique on all of the Fibre Channel switches in the fabric.
C. They are assigned on a per-line card basis.
D. They must be the same on all of the Fibre Channel switches in the fabric.
Correct Answer: B

QUESTION 11
Fibre Channel IDs are dynamically assigned to which objects?
A. Cisco Fabric Services packets
B. WWPNs
C. FSPF packets
D. FEXs
E. VSANs
Correct Answer: E

QUESTION 12
Which standard has Cisco used to implement VM-FEX?
A. IEEE 802.1BR
B. IEEE 802.1Qbb
C. IEEE 802.1Qaz
D. IEEE 802.1p
E. IEEE 802.1x
Correct Answer: A

QUESTION 13
You configure STP on a switch that is attached to a Cisco FabricPath domain and that has the vPC feature deployed.
How do you configure STP on the switch in the Cisco FabricPath domain on VLAN 10?
A. switch(config)# spanning-tree vlan 10 priority 0 switch(config)# spanning-tree pseudo-information switch(config-
pseudo)# vlan 10 root priority 0
B. switch(config)# spanning-tree vlan 10 priority 8192 switch(config)# spanning-tree pseudo-information switch(config-
pseudo)# vlan 10 root priority 4096
C. switch(config)# spanning-tree vlan 10 priority 4096 switch(config)# spanning-tree pseudo-information switch(config-
pseudo)# vlan 10 root priority 8192
D. switch(config)# spanning-tree vlan 10 priority 0 switch(config)# spanning-tree pseudo-information switch(config-
pseudo)# vlan 10 root priority 4096
Correct Answer: B
Note that it is fine to use the spanning-tree priority command and the spanning-tree pseudo-information command
together, but the root priority in the pseudo-information needs to be a lower value (higher priority) than the spanning-tree
priority to make sure that the remaining working Cisco FabricPath switch is sending a superior BPDU with the common
FabricPath bridge ID and the configured spanning-tree pseudo-information priority and remains at the spanning-tree
root. Reference: https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/white_paper_c07-728188.pdf page 44

Share Pass4itsure coupons for free

pass4itsure coupon

Reasons to choose Pass4itsure

Pass4itsure offers the latest exam practice questions and answers free of charge! Update all exam questions throughout the year,
with a number of professional exam experts! To make sure it works! Maximum pass rate, best value for money! Helps you pass the exam easily on your first attempt.

why pass4itsure

This maybe you’re interested

Summarize:

The latest Cisco CCNP Data Center 300-165 dumps, online 300-165 practice test questions, pass the 300-165 exam: https://www.pass4itsure.com/300-165.html (Q&As: 294). Boost exam skills Share 300-165 pdf and 300-165 Youtube videos for free